MK II Mosquito™ - Standard unit on its own.
MSTD-001

The Standard MK II Mosquito™ is encased in an anti-vandal housing and incorporates a range of additional functions. These are:
• Continuous operation / 20 minute auto shut-off selection
• Indoor / outdoor operation selection
• Onboard Vox system selection. This adjusts unit output volume in line with ambient noise levels.

- Range of input terminals allowing easy connection to triggering devices such as:
• Timers
• Remote control
• PIR
• CCTV

- Unit is powered by a 12v power supply (supplied separately) with a draw of less than 100mA.
- Unit is supplied complete with variable mounting bracket. Not supplied with power supply, triggering device or security cage

Mosquito™ - GSM enabled unit on its own.

Primarily designed for the police, the GSM Mosquito as its name implies can be activated  / deactivated via mobile telephone text message.

This system requires a SIM card in order to function over the GSM network. SIM cards can be purchased by the customer from a range of suppliers, however, CSS Ltd. recommend Vodafone Data SIM's which can be supplied pre-installed in the GSM Mosquito.

Product Information.

The GSM Mosquito system was initially designed for use by police forces who needed to use the Mosquito in areas or at times when there is no one on site to activate the device. The system is now being taken up by private sector clients also.

There are three primary methods for assessing when it is appropriate to activate the system.

1. Residents / business people in the area are provided a contact number for a qualified / nominated person / police officer. When the local residents / business people feel there is a problem, they call the nominated person, explain the situation and if the nominated person feels it is appropriate, he / she can send an activation text message to the relevant Mosquito specifying the length of time the unit should stay on.

2. Local police patrols / security staff roaming the area can upon seeing a problem situation, activate the unit as they feel is necessary.

3. In areas where there is CCTV coverage, the Mosquito can be activated by the CCTV monitoring service

This system requires a SIM card in order to function over the GSM network. SIM cards can be purchased by the customer from a range of suppliers, however, CSS Ltd. recommend Vodafone Data SIM's which can be supplied pre-installed in the GSM Mosquito.

Standard security cage.

Folded Zinc coated steel. LASER cut
MCG-001

Light-weight wire security cage
MCGL-001

**NEW** Mosquito PIR Activation Timer

Many Mosquito system users are activating the Mosquito by using a PIR detector. Due to the functionality of the Mosquito, the unit will either stay on for 20 minutes or remain on constantly. In some situations this has become an issue and we have been asked for a way to allow the PIR to turn the unit on when it detects a presence and turn it off when it is not detecting a presence.

The new PIR Activation Timer which can be retro-fitted inside a Mosquito unit on-site will allow the user to select how long (5-60 seconds) after the PIR has detected movement that the Mosquito will remain active for. Each subsequent activation of the PIR will reactivate the Mosquito for the set duration.

PAA3 Audio Analyser

Handheld Audio Analyzer with USB Interface

Installing a Mosquito correctly can be difficult for two reasons. Firstly the majority of installation engineers are too old to hear if the unit is functioning and secondly, the sound emitted from the unit is highly directional. This means that the installation engineer has to ensure that the sound is going where it is needed. This is not as easy as it appears.

The PAA3 Hand Held Audio Analyser can be set-up to detect the 18KHz tone emitted by the Mosquito and provide a digital readout of the dB level. This means that the engineer can move around the area where the sound is required and check that there is sufficient dB level there. It is suggested that for the Mosquito to be most effective, levels need to be in excess of 75 dB.

Standard domestic type plug-in remote control for Remote consumer
MREMC-001

Simple easy to use plug in radio operated remote control with a range of appx. 25 meters. Simply plug into mains socket and then plug the Mosquito into the remote. Mosquito can then be activated from a distance.

External PIR Weather proof
MPIR-001

As with all of the Mosquito accessories, it is not necessary to purchase our items, however, it should be noted that this PIR and any that are to be used with the Mosquito is a 12v PIR (Normally closed, going open) and is completely weatherproof.

External PIR - High stability (Weather proof PIR with low false activeation rate)
MPIRHS-001

As with all of the Mosquito™ accessories, it is not necessary to purchase our items, however, it should be noted that this PIR and any that are to be used with the Mosquito is a 12v PIR (Normally closed, going open) and is completely weatherproof. This unit is designed to have a 'low false activation rate' and should not activate for birds, cats, dogs etc.

Standard UK timer
MTIM-001

Standard UK plug-in 13A timer. Plug into mains socket and plug the Mosquito into it. Can be set for as many on/off switches per 24 hours as required.

Power supply - GSM Mosquito
12v dc rectified 2 Amp rated inline power supply with standard UK plug.

Please note the supply has a lead length of 1m but can be extended using suitably rated cable.

Power supply Standard UK 12v
MPSU-001

Standard 12v power supply selected to ensure that power spikes are limited to protect your Mosquito. Supplied with 15 meters of cable pre-fitted, with stripped, tinned and colour coded ends.